2014 Aluminum Sheet

2014 Aluminum Sheet

Application Market: Lithium Battery Busbar, Cosmetic Bottle Caps, Aluminum Lugs, Explosion Relief Valve, Heat Sink, PCB, etc.

2014 aluminum sheet is a kind of high-strength hard aluminum alloy and is also regarded as a kind of forged aluminum alloy. In the field of materials science, it has many unique properties and excellent performance in terms of strength, hardness, wear resistance, and corrosion resistance. This is mainly due to the optimized ratio of aluminum, magnesium, copper, silicon, and other elements in the composition, among which the copper content is high, which has an important impact on the strength and hardness of the alloy.

Generally speaking, the hardness value of the plate 2014 is between 95 and 120HB. However, the specific hardness value of 2014 aluminum alloy will vary according to different manufacturing processes and treatment methods. For example, different heat treatment processes can lead to changes in hardness. For more specific data, it is recommended to consult the relevant industry reports or consult our professional engineers.

In addition, to further improve the mechanical properties and corrosion resistance of the 2014 aluminum sheets, heat treatment, and surface treatment are generally selected.

As a high-strength aluminum alloy, the tensile strength of 2014 aluminum alloy is usually between 400-440 MPa, which means that it can withstand pressures of up to 400-440 mpa per square millimeter. That is to say, it can withstand great pressure without being easily deformed or damaged. Similarly, its yield strength can reach 300-320 MPa, which ensures that it can maintain stability when subjected to the corresponding pressure, avoiding excessive deformation of the material.

In terms of processing performance, 2014 aluminum alloy has good plasticity and machinability. It can manufacture parts of different shapes and sizes through various plastic-forming processing processes, such as rolling, extrusion, forging, etc. In addition, whether it is cutting, forming, or welding, 2014 aluminum plates can also have good processing results.

In terms of corrosion resistance, 2014 aluminum alloy performance is also very good. It can be used in various environments, such as Marine environments, chemical environments, etc. The corrosion resistance of sheet 2014 alloy is mainly due to the dense oxide film formed on its surface, which effectively prevents the intrusion of corrosive media such as oxygen, water vapor, and chloride ions.

In the salt spray test, its corrosion resistance is several times that of ordinary aluminum alloy. In the Marine environment, it can resist the corrosive media. Its corrosion resistance has been fully verified, and it can maintain the stability of its structure and performance for a long time. It is precisely because of its excellent corrosion and wear resistance that the service life of 2014 aluminum alloy is greatly extended, thus reducing the frequency of maintenance and replacement and reducing operating costs. At the same time, it also makes 2014 alloy ideal for a variety of harsh environments.

In addition, the wear resistance of the 2014-grade aluminum sheet is also very good, mainly in its ability to resist friction and wear. After up to 3,000 cycles of friction and wear testing, it has a wear rate of only 0.01-0.05 mm³/N·m, which is much lower than many other aluminum alloys. In other words, the high strength characteristics of 2014 aluminum alloy can maintain longer stability and service life under persistent friction and wear conditions.

In practical applications, 2014 alloy aluminum sheet is widely used in aircraft, automobiles, ships, and other fields of structural parts and parts manufacturing. In the aerospace field, 2014 aluminum alloy is widely used in the manufacture of aircraft structures because of its excellent mechanical properties and stability, such as key components such as wings, fuselages and tailfins, to ensure the safety and reliability of aircraft.

In the automotive industry, it is often used to manufacture engine components, suspension systems, frames, wheels and other key structural components that need to withstand heavy loads to improve the performance and stability of the car. In shipbuilding, 2014 aluminum alloy because of its excellent corrosion resistance and high strength is often used in the construction of hull, ship bottom, propeller and ship equipment and other key components. It is an ideal choice to enhance the corrosion resistance, stability energy saving, and emission reduction of ships to improve the energy efficiency of the hull.

In general, 2014 aluminum alloy is a high-quality aluminum alloy material with excellent performance and wide use, and has a wide range of application prospects and market prospects. Its emergence has provided strong support for the development of manufacturing industry. If you need to know more about 2014 aluminum alloy, it is recommended to consult professionals or consult relevant materials.

2014 Aluminum alloy is a high-strength, hard aluminum alloy with excellent mechanical properties and comprehensive properties. The following is a detailed introduction to its mechanical properties, processing properties and advantages:

Mechanical Properties

  • Tensile strength: The tensile strength of 2014 aluminum alloy is high, usually about 400MPa. This means that it can withstand large tensile forces and has good tensile properties.
  • Yield strength: The yield strength of 2014 aluminum alloy is also very high, usually about 320MPa. This shows that it is not prone to plastic deformation when subjected to external force, and has good rigidity and stability.
  • Elongation: 2014 The elongation of aluminum alloy is high, usually about ≥12%. This means that when stressed, it can absorb energy through a certain plastic deformation and improve the toughness of the material.
  • Hardness: 2014 aluminum alloy hardness is high, through heat treatment can be further strengthened. The increase of hardness helps to improve the wear resistance and durability of the material.

Processing Properties

  • Plasticity: 2014 aluminum sheet plate has excellent plasticity and can be easily plastic-processed. By stretching, bending, compression, etc., it can be processed into a variety of complex shapes and structures.
  • Welding performance: 2014 aluminum alloy has good welding performance, can be connected by fusion welding, brazing and other ways. After welding, its mechanical properties and corrosion resistance meet the requirements of most applications.
  • Machining performance: Alloy 2014 aluminum sheet machining performance is excellent, can be milling, turning, drilling, cutting and other processing operations. In the machining process, the appropriate tool and cutting parameters should be selected to ensure processing quality and efficiency.


  • High strength and stiffness: Due to the high copper content, the tensile strength and yield strength of the 2014 aluminum sheets are higher than that of ordinary aluminum alloy. High strength and stiffness make it able to withstand large loads and stresses and can meet the needs of various complex structures. Suitable for the manufacture of structural parts and components that need to withstand heavy loads.
  • Good cutting performance: 2014 aluminum alloy has good cutting performance, easy to cut, drilling, milling and other processing operations, can improve production efficiency and reduce processing costs.
  • Excellent mechanical properties: heat treatment can be strengthened: with extrusion effect. 2014 Aluminum alloy has excellent mechanical properties, with high hardness, wear resistance, fatigue resistance and other characteristics. This enables it to maintain stable performance for a long time in a variety of harsh working environments. However, the plasticity in hot state is not as good as 2A50.
  • Good corrosion resistance: 2014 aluminum alloy has good corrosion resistance and can resist the erosion of atmosphere, seawater, acid and alkali and other media. In the salt spray test, its corrosion resistance is several times that of ordinary aluminum alloy. Therefore, under normal conditions of use, its corrosion resistance extends the service life of the material and can meet the needs of long-term use.
  • Good electrical conductivity: 2014 aluminum alloy has good electrical conductivity, which can meet the requirements of conductive materials in electrical engineering. Its electrical conductivity is slightly lower than that of copper, but better than other common metal materials.
  • Recyclability: 2014-grade Aluminum sheet is a recyclable material that meets the requirements of environmental protection and sustainable development. After the end of the product life cycle, the effective use of resources can be achieved through recycling and reprocessing, which is conducive to the effective use of resources.
  • Beautiful appearance: 2014 aluminum alloy surface finish is high, can show a beautiful metallic luster. This makes it not only practical, but also has a good decorative effect, and is widely used in various architectural, decorative and industrial fields.

In summary, 2014 aluminum alloy is an aluminum alloy material with high strength, excellent mechanical properties, good corrosion resistance and beautiful appearance. Its excellent processing properties and wide application prospects in various application fields make it an irreplaceable material choice in many fields.

The Application of 2014 Aluminum Sheet Plate

Due to its excellent mechanical properties and processing properties, the 2014 aluminum sheet plate is widely used in the manufacturing industry, especially in structural parts that need to withstand heavy loads and complex stresses or mechanical parts that need high-temperature resistance and high wear resistance. For example, forgings, thick plates and extruded materials in the fields of aerospace, automobile manufacturing, shipbuilding, construction, machinery manufacturing, electronic products, wheels and structural components, multi-stage rocket first stage fuel tanks and spacecraft parts, truck frame and suspension system structural parts and components. 2014 Aluminum alloy is an indispensable important material.

In the aerospace sector, 2014-grade aluminum sheet is the ideal choice for aircraft structure manufacturing and has won wide recognition for its excellent mechanical properties and reliability. In the automotive industry, it is widely used in the manufacture of engine components, frames, and other key structural parts to ensure the safety and reliability of vehicles with its high strength and wear resistance. In shipbuilding, 2014 aluminum alloy with its excellent corrosion resistance and high strength has become the preferred material for building hulls and shipboard equipment.

This means that whether in aircraft, automotive or Marine manufacturing, the 2014 aluminum alloy can provide strong support and protection for your parts.

2014 Aluminum alloy has a wide range of applications in the aerospace field, mainly reflected in the following aspects:

  • Aircraft structure: 2014 Aluminum alloy because of its high strength, lightweight, and excellent processing properties, become the ideal choice of aircraft structural materials. The fuselage, wings, tail, and other key components are a large number of 2014 aluminum sheets.
  • Engine manufacturing: The engine is the heart of the aircraft and needs to withstand extremely high temperatures and pressures. 2014 Aluminum alloy can be used to manufacture engine housing, blades and other key components, its high strength and corrosion resistance to meet the strict requirements of the engine.
  • Spacecraft manufacturing: In the manufacturing of satellites, rockets and other spacecraft, 2014 aluminum alloy also plays an important role. It is used to manufacture structural components of spacecraft, such as solar panels, brackets, etc., and can also be used to manufacture fairing, transition segments and other key parts.
  • Ground facilities construction: In the construction of ground facilities such as airport runways and aircraft maintenance plants, 2014 aluminum alloy has also been widely used. Its characteristics of high strength, durability and easy maintenance make it an ideal material for the construction of ground facilities.

In general, 2014 aluminum alloy is widely used in the aerospace field, due to its characteristics such as lightweight and high strength, it will be more widely used in the future aerospace science and technology field.

2014 Aluminum alloy is a kind of high strength, hard and excellent comprehensive properties of aluminum alloy, with a wide range of applications. The ways and methods of recycling are as follows:

  • Recycling sources: The main sources of scrap aluminum include the scraps produced in the production process, defective products, etc., and the waste in the process of consumer use. To effectively recycle waste aluminum, it is necessary to collect these wastes separately.
  • Pretreatment technology: In the recycling process, it is necessary to pre-treat the waste aluminum, such as crushing and sorting. These technologies can remove impurities from waste aluminum and obtain high-quality waste aluminum. For example, the metal shredder can shred large pieces of scrap aluminum to facilitate subsequent processing; Magnetic sorters can separate iron from other impurities based on magnetism.
  • Smelting technology: The waste aluminum is melted at high temperature to obtain pure aluminum or aluminum alloy ingot. In the smelting process, parameters such as temperature and time need to be controlled to ensure that high-quality aluminum or aluminum alloy ingots are obtained. At the same time, it is also necessary to treat the slag and extract the valuable metals.
  • Recycling: The 2014 aluminum alloy can be smelted and cast again for the manufacture of new products. This can not only reduce the demand for raw materials, reduce production costs, but also reduce environmental pollution and achieve sustainable use of resources.
  • Environmental significance: By recycling waste aluminum, it can reduce the dependence on limited raw materials and reduce the damage to the environment by mining new ores. At the same time, reduce the generation of waste, reduce the pressure on land resources, is conducive to the protection of the ecological environment.

In short, the recycling of 2014 aluminum alloy is of great significance, not only conducive to the sustainable use of resources, but also in line with the concept of green environmental protection. Through reasonable recycling ways and methods, the value of waste aluminum can be maximized and contribute to social and economic development.

The price of 2014 aluminum plate = aluminum ingot price + processing fee.

Note: 2014 aluminum plate has different tempers and specifications, the quotations of each aluminum plate manufacturer are also different. For a detailed quotation, free online consultation is available, we are very happy to provide you with support and help!

Interested In Working With WANTAI?

Please insert your contact information into the following contact form and let us know how we can help you! We will be in touch with you as quickly as possible.

Related Products

Similar Posts